3U ESM Processor
The VPX ESM Processor Board is based on PowerPCMPC8640D and Virtex-7 FPGA's with 3U VPX formfactor. Itsupports PCle, Giga Bit Ethernet, RIO’s & Differential IO’s.It has dedicated memory DDR2 at 400MHz, QDRII SRAM,Flash connected to Processor and a FPGAto run the application and process data..
Features:
| Processor | MPC8640D Power PC Processor operating up to @1.25GHz |
| Processor Memory | 1 GB DDR2 SDRAM @ DDR2-400 Data rate (200 MHz Clock) 256 MB Boot Flash 128 MB Recovery Flash |
| FPGA | Xilinx Virtex 7 XC7VX485T series |
| FPGA Memory | Two 36 MB QDRII+ SRAM Memory |
| PCIe | x4 lanes between Processor and FPGA x4 from FPGA to Backplane via P1 connector |
| Ethernet | Two 10/100/1000 PHY connected to MPC8640D and routed to VPX Backplane |
| LVTTL | 32 LVTTL signals from Virtex-7 FPGA to VPX Backplane |
| Rapid IO’s | x1 RIO @3.125Gbps from Virtex 7 to the ERT module on the Front panel x4 RIO @ 3.125Gbps from Virtex 7 FPGA to the VPX backplane |
| Power | +5V from VPX backplane, <50 watts power consumption |
| Temperature | -40℃ to +85℃ |
| Form Factor | Standard 3U form factor |
| Weight | ~750g |