ESM Processor Board


The VPX ESMP board is based on the PowerPC MPC8640D processor, Virtex-5 and Virtex-7 FPGA’s with 6U form factor. It has high speed interfaces like PCIe, Rocket IO and Ethernet on board and also to the backplane. It has multiple memories including DDR2, QDRII and SATA NAND Drive to run the applications and to store the critical data.

Features:
Processor PowerPC MPC8640D dual core Processor operating @1.2GHz
Processor memory 1GB DDR2 SDRAM
256MB Boot flash
128MB Recovery flash
CPLD XC2C256 Cool Runner II
FPGA Xilinx Virtex-5 (XC5VFX200T) 1 No.
Xilinx Virtex-7 (XC7VX485T) 1 No.
FPGA Memory (Virtex-5) Two 32MB QDRII SRAM
512MB DDR2 SDRAM
PCIe operating @2.5Gbps x4 port to Processor
x4 port to Virtex-5
x4 port to Virtex-7
x2 port to SATA Host controller
Two x8 ports to VPX backplane
FPGA inter connectivity x4 RIO’s @ 3.125Gbps
32 LVCMOS lines
SATA NANDrive 64Gbyte
Serial ports (RS232) 2 RS232 ports from Processor
2 RS232 ports from Virtex-5
Ethernet ports (1Gbps) 1 port (10/100/1000Mbps) from Processor to front fascia
1 port (10/100/1000Mbps) from Processor to VPX backplane
1 port (10/100/1000Mbps) from Virtex-5 to VPX backplane
Single ended IO’s 40 TTL lines to 51 pin microD connector on front fascia from Virtex-7
48 LVTTL/TTL signals from/to Virtex-7 to VPX backplane
32 LVTTL signals from/to Virtex-5 to VPX backplane
RS422 16 Rx RS422 lines connected to Virtex-7
16 Tx RS422 lines connected to Virtex-7
RIO and SFP/SFP+ transceivers 1 RIO from Virtex-7 routed to the SFP transceiver on the front fascia
4 RIO’s from Virtex-7 routed to the VPX backplane
Form Factor 6U VPX
BSP Linux 3.14
Temperature Industrial grade

Radar Signal Processing